93 lines
3.4 KiB
Plaintext
93 lines
3.4 KiB
Plaintext
sata186us version 3.1
|
|
|
|
This is a newer manual upgrade server software, also previously known
|
|
as "upgrade.exe"
|
|
|
|
Upgrade for ATA 186/188
|
|
|
|
NOTE: This software is to be run from dos command line
|
|
in Windows 9X/ME/NT/2000
|
|
|
|
Requirements:
|
|
-) network connection between PC and Cisco ATA 186
|
|
-) PC machine running windows O/S
|
|
|
|
----------------------------------------------------
|
|
To upgrade your box, save this executable and the software image
|
|
(the software image will have a ".zup" extension) and language
|
|
image (the language image will have a ".kup" extension) in a
|
|
directory on your PC. At the DOS prompt of the directory where
|
|
the files are saved, you will enter the following:
|
|
|
|
sata186us <software_file_name> -d1 -any2
|
|
|
|
WARNING -- When upgrading from software version 1.xx to 2.0, make
|
|
sure there are entries in the UID0 and UID1 fields, and that you
|
|
hear a dial tone when you pick up the telephone handset. Failure
|
|
to do so can result in loss of the MAC address during upgrade.
|
|
|
|
Your screen will prompt you with instructions on how to upgrade
|
|
the box. You will access the voice prompt of the ATA 186 and
|
|
enter the following commands:
|
|
|
|
100#<ip_address_of_PC>*8000#
|
|
(to upgrade the ATA 186's software version)
|
|
|
|
101#<ip_address_of_PC>*8000#
|
|
(to upgrade the ATA 186's language file)
|
|
|
|
When upgrading many boxes, you can save time by saving the commands
|
|
above in your telephone's speed-dial, and using them after accessing
|
|
the ATA 186's voice menu.
|
|
----------------------------------------------------
|
|
Available options: when using this upgrade software:
|
|
|
|
usage:
|
|
|
|
sata186us version 3.1
|
|
usage: sata186us {-h[host_ip]} {-p[port]} {-quiet} <imageFile>
|
|
-h[host_ip] Set host IP to specific IP (in the case where there
|
|
are more than one IP addresses for the host.
|
|
Default use 1st IP address obtained by gethostbyname).
|
|
-p[port] Set server port to specific port (default is 8000,
|
|
use different port only if you are setting up an IP
|
|
directed upgrade server other than the default).
|
|
-quiet quiet mode, send all output to log file named
|
|
as [port].log (useful when running the upgrade
|
|
server as a deamon).
|
|
-any Allow upgrade even if software version is less
|
|
than or equal to those of client box.
|
|
-any2 Allow upgrade regardless of software type and version.
|
|
-d1,-d2,-d3 Set verbose level for debugging.
|
|
imageFile Image file is file with a '.zup' or '.kup' extension.
|
|
e.g.
|
|
sata186us -any -d1 test.zup
|
|
sata186us -h192.168.2.170 -p8002 -quiet test.zup
|
|
|
|
----------------------------------------------------
|
|
Below is a sample run of upgrade server in ready mode
|
|
PC name: mypc
|
|
PC IP: 192.168.1.10
|
|
----------------------------------------------------
|
|
Microsoft(R) Windows Millennium
|
|
(C)Copyright Microsoft Corp 1981-1999.
|
|
|
|
C:\>ata186us ata134-elang.kup
|
|
Using Host: mypc with IP : 192.168.1.10 as upgrade server
|
|
image found: language 51 -- ata186.itsp2.v1.34
|
|
|
|
Using dialpad of your telephone (attached to your ATA box),
|
|
press ATA button to go to main menu, and enter:
|
|
|
|
101#192*168*1*10*8000# (to upgrade language 51)
|
|
|
|
NOTE:
|
|
Pressing 123# will announce your code's version number.
|
|
You can later verify that you have upgraded your ATA box.
|
|
|
|
-------------------------------------------
|
|
|
|
This program runs continuously; Press <ctrl>-c to abort.
|
|
Upgrade server ready...
|
|
|